You can perform remote firmware updates using ESP8266OTA (Over the Air) update is the process of loading a new firmware to ESP8266 module using WiFi connection rather than a serial communication. This type of functionality is extremely useful in case of no physical access to the ESP module.
Hardware Setup
Add Includes to Skecth to enable OTA
| Code Block | ||
|---|---|---|
| ||
#include <ESP8266WiFi.h> #include <ArduinoOTA.h> // Enable Remote Updates |
The password is same API_KEY
| Code Block |
|---|
#define ODEV_API_KEY "XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX" |
You can se full featured OTA Sample:
On IDE: File > Examples > OpenDevice > Projects > SonoffBasic
| Info |
|---|
The first upload must be done by the Serial, the others can be done by the network. |
Upload
...
( Using Middleware / Server )
The OpenDevice Server has Firmware version management functionality (binaries only for now)
Through the Programming Menu, it is possible to remotely send firmware to devices
Steps:
1. Generate .bin file: The file will be saved in sketch folder
2. Upload firmware binary in Menu > Programming
3. Select active connection
| Info |
|---|
We still do not have any feedback if the update worked out right or wrong. See: https://github.com/OpenDevice/OpenDevice/issues/138 You can enable DEBUG_PORT and DEBUG_LEVEL = HTTP_UPDATE in ESP Configuration Menu on Arduino IDE, to troubleshoot problems |
Upload ( Using IDE )
| Info |
|---|
Enable SoftAP: WiFi.mode(WIFI_AP_STA); |
On serial console you can see the IP:
...
Only if module is connected to network, after a couple of seconds, the esp8266-ota port will show up in Arduino IDE.
| Info | ||
|---|---|---|
| ||
avahi-browse -rt _arduino._tcp |
If it does not appear in the list, restart the IDE.
The password is same API_KEY
If it still does not appear, you can use the option: Upload ( Manual PUSH )
...
| title | On linux, you can scan |
|---|
...
Upload (
...
Command Line )
This option uses the command line (terminal) to upload.
...
Much information will appear, look for the file ending with ".ino.bin" on console
Upload ( Using Middleware )
Status