This tutorial introduces you to the basics of RITDesigner, part of RITDevX project.
THIS IS A WORK IN PROGRES - THINGS CAN CHANGE
Requirements:
To run you need to have Java installed
Download:
https://github.com/ricardojlrufino/RITDevX/releases
Download file: rit-designer-VERSION-distribuition.zip
Running:
Unzip the ZIP file wherever you want, and then execute the file:
On Linux / Mac:
bin\RITDesigner.shOn Windows:
bin\RITDesigner.bat.EXE PENDENTE
Interface Overview:
Open Example:
Please open file: /examples/DemoCharts01/interface.ritd
Run simulation:
To run simulation, you need upload sketch to Arduino board.
Open Sketch: (Appdir)/examples/DemoCharts01/DemoCharts01.ino in Arduino IDE
Install OpenDevice library using Arduino Library Manager (Installing Arduino Library )
When you have the sketch running on Arduino, on Designer press F9 or Run → Start
The Controller module will open.
You see connection status notification, after you see “Sync Done“, means that the program connected with the arduino and synchronize all information
To check if the communication is working, click on the button indicated above, it is connected with the Led on pin 13 of the Arduino.
If something is wrong, check the logs (mouse right-click).
Also try to disconnect and connect again. You can also, show logs.
How does it all work?
Now we will give a brief explanation of how it all works.
How communication work ?
When you add a button and click on it, a command is sent to the Device (Ex. Arduino).
This command follows a communication protocol.
See more details: How communication work
COMPLEMENTAR falar sobre como usar os nomes e os custom commands, talvez explicar um pouco do código.
Add Comment